Polystyrene board is composed of polystyrene beads containing a volatile liquid blowing agent , after heating advance thermoformed white solid having a fine closed cell structure in a mold.

First, the common way to paste polystyrene board
Paste polystyrene board , there are two ways: one is sticky point frame method, the other is strip bonding method Point bonding method is suitable for base flatness poor walls ; sticky strip method is suitable for wall base flatness better . Must ensure that the use of point-bonded bonded area of not less than 30% . Paste polystyrene board is prohibited in the side mortar applicator .

Second, the paste polystyrene board precautions
Paste polystyrene board , polystyrene board exterior insulation with a standard size of 600mmx900mm, 600mmx1200mm two types of local irregularities can be cut on site , watch the cut perpendicular to the plate surface . Wall corners than the minimum size of 300mm, polystyrene board patchwork can not stay at the four corners of the plate surface of the door windows are arranged in a horizontal sequence , up and down the wrong seam paste , yin and yang angle should be wrong stubble processing . Sticky board application-specific tools uniform compression polystyrene board , at any time using a 2 -meter to check flatness and verticality by foot and off-line . Pay attention to remove the extruded adhesive plate edge , meet to avoid ash . Packing polystyrene board with the corresponding time slot width exceeding 2 mm . Patchwork elevation of more than 1.5 mm with special abrasive polished .
By: CHINAEPS
QQ: 289344883
Mob:+0086 13606167128
Website:www.expandablepolystyrene.com
Email: info@chinaeps.net