Olympic and EPS Energy Saving Module
Update: 2016-08-10 14:58 View:
31 th Summer Olympic Games in Beijing on August 6, held in Rio de Janeiro. Rio Olympic history to become the first South American city to host the Olympic Games, the second largest city in Brazil as it has impressive urban architecture.
This time all the venues of the Olympic Games, the Rio Olympic swimming stadium is not large, but it is one of the most talked about venues, especially to attract the attention of many culture enthusiasts, the panel is anti-UV treatment, the wall is using eps EEB module to help regulate the temperature of the building.
Insulation and wall integration, non-absorbent, non-shedding, no crack and corrosion resistance. Eps outer and inner layers of wall insulation, low thermal conductivity, only 0.025w / m.k, than the national standard requirements 0.60w / m.k even lower, that is, high insulation performance than the national standard 20 times.
EPS module building has the following characteristics:
1. The insulation effect: the inner and outer wall insulation, low thermal conductivity, only 0.030w / m.k, than the national standard requirements 0.60w / m.k even lower. When North China outdoor -10 ℃, the people live without indoor heating equipment, heat and sun light alone produced household appliances can reach 15 ℃ -20 ℃.
2. Construction of convenience: just plug construction building blocks, put a reinforced concrete mortar on irrigation. Molding, eliminating the need to support the cost of the traditional template template, templates demolition process and the use of templates, improve labor efficiency, reduce labor costs, speed up the construction speed.
3. The structural integrity is good: overall watering molding, structural building good strength reinforced concrete walls of ordinary brick strength seven times, high shock strength.
4. The insulation and construction with life: insulation and wall integration, non-absorbent, non-shedding, no crack and corrosion resistance.
5. The high strength and good toughness: Large module material density, high capacity Hang side pressure, pouring process module deformation, smooth and beautiful after the completion of the wall.
6. High bond strength: dovetail tip surface of the module design, and surface mortar with good bonding properties, the system can be as high bond strength 0.35Mpa above.
7. Low comprehensive cost: energy requirements under the same conditions. With a module housing can significantly reduce material costs; facilitate construction. High degree of mechanization operations, reduce labor costs; good insulation effect, greatly reduce winter heating and summer cooling costs.
8.Good sound insulation.
9.moisture, salinity: an effective solution to the low-rise building more humid rainy season indoor problems and salinization serious shout residential area of serious problems, extend the life of the building, improve the comfortable residence is damp, saline areas the preferred housing.
10. Fire performance: high fire-retardant polystyrene Class B1, flame retardant, safety, and environmental protection.
By: CHINAEPS
QQ: 289344883
Mob:+0086 13606167128
Website:www.expandablepolystyrene.com
Email: info@chinaeps.net
This time all the venues of the Olympic Games, the Rio Olympic swimming stadium is not large, but it is one of the most talked about venues, especially to attract the attention of many culture enthusiasts, the panel is anti-UV treatment, the wall is using eps EEB module to help regulate the temperature of the building.
Insulation and wall integration, non-absorbent, non-shedding, no crack and corrosion resistance. Eps outer and inner layers of wall insulation, low thermal conductivity, only 0.025w / m.k, than the national standard requirements 0.60w / m.k even lower, that is, high insulation performance than the national standard 20 times.
EPS module building has the following characteristics:
1. The insulation effect: the inner and outer wall insulation, low thermal conductivity, only 0.030w / m.k, than the national standard requirements 0.60w / m.k even lower. When North China outdoor -10 ℃, the people live without indoor heating equipment, heat and sun light alone produced household appliances can reach 15 ℃ -20 ℃.
2. Construction of convenience: just plug construction building blocks, put a reinforced concrete mortar on irrigation. Molding, eliminating the need to support the cost of the traditional template template, templates demolition process and the use of templates, improve labor efficiency, reduce labor costs, speed up the construction speed.
3. The structural integrity is good: overall watering molding, structural building good strength reinforced concrete walls of ordinary brick strength seven times, high shock strength.
4. The insulation and construction with life: insulation and wall integration, non-absorbent, non-shedding, no crack and corrosion resistance.
5. The high strength and good toughness: Large module material density, high capacity Hang side pressure, pouring process module deformation, smooth and beautiful after the completion of the wall.
6. High bond strength: dovetail tip surface of the module design, and surface mortar with good bonding properties, the system can be as high bond strength 0.35Mpa above.
7. Low comprehensive cost: energy requirements under the same conditions. With a module housing can significantly reduce material costs; facilitate construction. High degree of mechanization operations, reduce labor costs; good insulation effect, greatly reduce winter heating and summer cooling costs.
8.Good sound insulation.
9.moisture, salinity: an effective solution to the low-rise building more humid rainy season indoor problems and salinization serious shout residential area of serious problems, extend the life of the building, improve the comfortable residence is damp, saline areas the preferred housing.
10. Fire performance: high fire-retardant polystyrene Class B1, flame retardant, safety, and environmental protection.
By: CHINAEPS
QQ: 289344883
Mob:+0086 13606167128
Website:www.expandablepolystyrene.com
Email: info@chinaeps.net